Signed Up To The Energetic Forum...

Signed Up To The Energetic Forum... http://www.energeticforum.com/ and hopefully will get some constructive criticism of what we're doing and to what extent we are perceiving this stuff correctly.

Posted this in new members area:
"
Trying To Popularise The Bedini/Bearden stuff in England
Hello folks,
Having been impressed by Tom Bearden and John Bedini and there will be of course many others of note, a friend of mine (99 % of work) and myself have built the Bedini fan motor as well as an SSG and another on the drawing board as well...

For my own part I know little "hand on stuff".My mate is an engineer and we both are struggling to understand the over unity stuff and need to try to get to grips with it more.

Here is my blogsite:
Energy From The Vacuum For Idiots

and I would welcome any constructive criticism please :-) either on the blog or on here...

There is some video I've put on you-tube on the blog. No doubt many of the advanced people will be a little amused at our efforts but we are determined to get to grips with this stuff. We are at the point where we need to be able to make meaningful measurements and indeed understand what should be going on....

Simon"

More Hands On Video Plus Discussion Of How It All Works...

The last video was marred by me filming with the nightscope on....but as my understanding of this "mainstream " technology has increased so has my understanding of the Bedini circuitry :-)

A couple of friends who've received this blog link have asked "So, what's it all about ?" or "So what ?". The best answer up to today that I've been able to give has been something along the lines of an analogy with a windmill that receives mechanical energy from outside itself for FREE. We are trying to do the same with electromagnetic energy. After we filmed yesterday Tom and myself discussed our understanding of what was going on.


On the video last week Tom said that the Bedini fan motor kit was measuring 300 V. In fact that was on the DC setting. On the AC setting we were getting 600 V. THIS WEEK we're in part looking at the "Simplified School Girl circuitry" - essentially a smaller version than the propriety fan motor kit we looked at last week and something Tom Hackett built a few months ago. Tom calls it the "Bedini MK 1". He built it in an afternoon after I'd been collecting bits and asking advice off people for months ! Instead of a bicycle wheel Tom used a caster with four magnets attached.

Part One - Discussing The SSG MK 1



Part Two - .....And Looking Ahead To Tom's MK 3 !



.....Anyway, Tom makes the point that NO MATTER HOW FAST BY HAND YOU TURN THE FAN MOTOR BY HAND YOU DON'T GET ANYTHING LIKE THE SAME VOLTAGE AS YOU DO WHEN IT'S CONNECTED TO THE PRIMARY SOURCE. Tom speculated that it was NECESSARY FOR A CHARGED COIL (COURTESY OF THE PRIMARY BATTERY) AND ALSO THE "AMPLIFICATION" OF THE INDUCED EMF (COURTESY OF THE PRIMARY BATTERY) WHICH A ROTATION BY HAND ALONE COULDN'T PRODUCE....


































Tom thought what was going on was that electron flow in the general environment were somehow being captured by the switching. As the coil was being charged by the 12 V primary source - and so causing the wheel to spin, the passing of the magnet was inducing an EMF which was "amplified" by the circuitry from the primary source. The primary source was thus causing the coil to be charged and also providing the "amplification" for what John Bedini calls "Radiant Energy" and what Tom Bearden calls "Energy From The Vacuum". (I strongly suspect my explanation is clumsy at best and possibly wrong in part. To the novice I say, please appreciate that we are struggling just like you, and to the initiated please enlighten us all by your input.)

Here I think the "Windmill" analogy breaks down because I think we are saying in this circuitry is, it would be like a windmill engineered to move the wind faster !

So, what I'll get Tom to clarify what I've tried to relate here and get the opinion of those who have travelled further down the road that we're on, and hope they are not to harsh with their comments :-).....as we are trying hard to understand this stuff :-)

Thoughts On The Politics Of Energy....

I suppose this blog will constitute a diary rather than anything systematic on the subject matter :-)

The aims of this blog are to popularise by simplification and give hope to people like ourselves who find the subject matter a little overwhelming....

IF energy is readily available from the vacuum BUT needs to be properly engineered - as opposed to us being loony "perpetual motion" "conspiracy theory types" etc WHY is it being suppressed ?

I believe the answer is this: The reserve currency of the world is the dollar. It derives it's value because most nations HAVE to sell it in dollars, and if you don't, you become part of the "Axis of Evil" ! IF alternative sources of energy where readily available, other than oil the dollar would be worthless.....and those who rule would be on top of a crumbling pyramid. Holding on to power is a very very appealing thing for those at the top - and I don't mean the puppets at the head of governments - I mean their sponsors.

I'll be seeing Tom Hackett later. He's developing what he calls his "Bedini MK III". There are several things on a practical level to discuss. I'm aware that the last video could have been broken down into even smaller steps. In future I'd like to take apart the fan motor again and look at the wiring and relate it to the schematic better...On the agenda also would also be STEP by STEP soldering of the components at some point....

We Have Lift Off !

So.....Tom has finished the Bedini fan kit.
Here is the link to the kit we bought:

http://rpmgt.org/order.html

which also gives video of the kit.......

After struggling for an hour or two with the 10 " brushless fans instructions we finally discovered this very useful video:

http://www.metacafe.com/watch/1415284/imhotep_bedini_fan_project_part_4/

....and here is a step by step guide:
(Put link here later)

Below is a video of the finished Bedini kit in action. We talk , discuss and struggle with this challenging science. We admit we understand little.

Part 1


Part 2


Tom has done very well putting it all together. I hope people watching this might learn something or better still leave comments on the blog that will help us all better understand and move forward with this technology.

Energy From The Vacuum For Idiots - Introduction

This new blog site has been inspired by the work of Tom Bearden, John Bedini and the great Nikola Tesla and no doubt many others. The bottom line is that energy from the vacuum is freely available. The science proves it, but the engineering is lagging behind. Why is the engineering lagging behind ? Because universities receive their funding from the Establishment, and the Establishment's greatest desire is to preserve the status quo.

Currently I'm (Simon Smith) working with my friend Tom Hackett in putting together the 10 " Bedini brush less fan kit. Tom is the engineer and hands on expert and I'm..... not the theoretician - just the cheerleader and wrestler of difficult concepts and circuit board diagrams that I haven't got the foggiest about.

There's much to discuss in future blogs on this subject, including Tom Hackett's "Bedini Mark 1" as he calls it, our struggle with understanding the instructions of the Bedini 10 inch fan kit....and also I won't be able to stop myself commenting on the politics of it all.

This blog site's mission is to help popularise the work, knowledge and projects of some great people associated with extracting energy from the vacuum of space ....for those who would be fellow travellers, but who move in the slow lane...

We live in the West Midlands, England and welcome hearing from anyone especially in our region. It would be great to gather like minded people together, not only in cyber space but in real space to push this project on, which is long overdue in our opinion.